SC Fastening Systems, LLC.
8531 S. Freeway Dr
Macedonia, Ohio 44056
Call us: 330.468.3300
Email us: info@scfastening.com
Print Back
The Crack-Pac® two-part, high solids, low-viscosity crack injection epoxy is designed to repair cracks in concrete. The mixed adhesive has the viscosity of a light oil and a low surface tension that enables it to penetrate fine to medium width cracks. Resin is contained in the cartridge and hardener is contained in the nozzle. Once the nozzle is threaded onto the cartridge, the hardener is released into the resin-filled cartridge by turning the knob at the base of the nozzle. The two components are mixed by shaking the cartridge.

FEATURES
  • Dispenses with a standard caulking tool, no dedicated dispensing tool needed
  • Low viscosity
  • Clean and easy mixing; no additional tools required
  • Chemically bonds with the concrete to restore strength
  • Resistant to oils, salts and mild chemicals
  • Non-shrink
  • Conforms to of ASTM C-881 Type I & II, Grade 1, Classes B & C
APPLICATION

Suitable for repair of cracks ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. Can be used to inject cracks in dry, damp or wet conditions with excellent results. Not for use in actively leaking cracks. Apply to concrete 40°F or above.

PROPERTY TEST METHOD RESULTS
Viscosity (mixed, 72°F) ASTM D 2393 1,400 cps
Bond strength (moist cure) ASTM C 882 2,010 psi (2 days)
3,830 psi (14 days)
Water absorption ASTM D 570 0.082% (24 hrs)
Tensile strength ASTM D 638 5,860 psi (7 days)
Elongation at ultimate ASTM D 638 14.10%
Compressive yield strength ASTM D 695 11,270 psi (7 days)
Compressive modulus ASTM D 695 318,600 psi
Linear coefficient of shrinkage ASTM D 2566 0.002
Gel time (72°F) ASTM C 881 2 hours - 60 g mass
Initial cure (72°F)   24 hours
Mixing ratio   8:01

Specifications

Capacity Ounces (Cubic Inches)

 N/A 9 (16.2)

Cartridge Type

 N/A Single

Package Quantity

 N/A 12

Dispensing Tool(s)

 N/A CDT10S Or Standard Caulking Tool

Mixing Nozzle

 N/A Included