Item # CPFH09, Crack-Pac® Flex-H2O™ Injection Epoxy - Crack Repair 9oz

Crack-Pac® Flex-H2O™ is a high solids hydrophobic polyurethane injection resin designed to seal leaking cracks, voids or fractures in concrete or solid masonry. The polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle. When the two are combined in the cartridge and mixed, the result is a low viscosity, water activated polyurethane. When the resin encounters water as it is injected into the crack, it becomes an expanding foam that provides a flexible seal in leaking and non-leaking cracks.

FEATURES

• Seals seeping or mildly leaking cracks
• 400% elongation provides a flexible seal for moving cracks
• Can be dispensed with a standard caulking tool
• Can also be used on dry cracks
• Can be used with a reduced amount or without accelerator to slow down reaction time
• Expands to fill voids and close off the back of the crack
• Expanding nature makes it suitable for sealing cracks in solid masonry
• Fast reacting - reaction begins within 1 minute after exposure to moisture; expansion may be completed within 3 minutes (depending on the amount of moisture and the ambient temperature).
• Non-shrinking hydrophobic formula with the elongation and flexibility of a hydrophilic resin
• 20:1 expansion ratio (unrestricted rise) means less material needed

APPLICATION

Suitable for sealing cracks ranging from 1/32" to 1/4" wide in concrete and solid masonry. Can be used to repair cracks in dry, damp and wet conditions with excellent results. Designed to perform in applications where water is seeping or mildly leaking from the crack. Apply to concrete 40°F or above.

Additional Components Needed For Crack Repair

*CIP-F requires EIP-EZA port.