Item # ETIPAC10KT, Crack-Pac® KIT Injection Epoxy Crack Repair On SC Fastening Systems

The Crack-Pac® two-part, high solids, low-viscosity crack injection epoxy is designed to repair cracks in concrete. The mixed adhesive has the viscosity of a light oil and a low surface tension that enables it to penetrate fine to medium width cracks. Resin is contained in the cartridge and hardener is contained in the nozzle. Once the nozzle is threaded onto the cartridge, the hardener is released into the resin-filled cartridge by turning the knob at the base of the nozzle. The two componentsmore

2 Crack-Pac cartridge / nozzle sets
12 E-Z-Click Injection Ports
2 E-Z-Click Injection Fittings with 12" tubing
1 pint of paste-over epoxy (8 oz. of resin + 8 oz. of hardener)
4 disposable wood paste-over applicators
1 pair latex gloves
Installation video

FEATURES

Dispenses with a standard caulking tool, no dedicated dispensing tool needed
Low viscosity
Clean and easy mixing; no additional tools required
Chemically bonds with the concrete to restore strength
Resistant to oils, salts and mild chemicals
Non-shrink
Conforms to of ASTM C-881 Type I & II, Grade 1, Classes B & C

APPLICATION

Suitable for repair of cracks ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. Can be used to inject cracks in dry, damp or wet conditions with excellent results. Not for use in actively leaking cracks. Apply to concrete 40°F or above.

PROPERTY	TEST METHOD	RESULTS
Viscosity (mixed, 72°F)	ASTM D 2393	1,400 cps
Bond strength (moist cure)	ASTM C 882	2,010 psi (2 days)
Bond strength (moist cure)	ASTM C 882	3,830 psi (14 days)
Water absorption	ASTM D 570	0.082% (24 hrs)
Tensile strength	ASTM D 638	5,860 psi (7 days)
Elongation at ultimate	ASTM D 638	14.10%
Compressive yield strength	ASTM D 695	11,270 psi (7 days)
Compressive modulus	ASTM D 695	318,600 psi
Linear coefficient of shrinkage	ASTM D 2566	0.002
Gel time (72°F)	ASTM C 881	2 hours - 60 g mass
Initial cure (72°F)		24 hours
Mixing ratio		8:01

less

Capacity Ounces (Cubic Inches)	N/A 18 (32.4)
Cartridge Type	N/A Single
Package Quantity	N/A 2
Dispensing Tool(s)	N/A CDT10S Or Standard Caulking Tool
Mixing Nozzle	N/A Included

Specifications

Capacity Ounces (Cubic Inches)

Cartridge Type

Package Quantity

Dispensing Tool(s)

Mixing Nozzle